Mitsubishi’s RX Laser is built to handle workpieces up to 13’x6.5’ (4mx2m). The evolution of jet pierce technology takes center stage on this machine. High Peak Pierce (HPP) can drastically change piercing times in mild steel – some studies have shown a reduction up to 80 percent. FAB control is another new feature which improves cutting ability, and allows more stability across the cutting area. And new M-Cut technology, also called Motion Cut, affords the ability to move through thin materials at greater speeds.





Model 4020 RX
Machine Travels: X x Y x Z in (mm) 161.41 x 82.6 x 5.9 (4100 x 2100 x 150)
Workpiece Dimensions: W x D in (mm) 159.44 x 81.49 (4050 x 2070)
Available Resonators: (model number/wattage output) 45CF-R, 60XF
Motion Drive System Design Helical Rack & Pinion
Processing Lens Focal Distance: in (mm) 5.0/7.5/10.0 (127/190.5/254)
No. of control axes 3
Machine Structure X-Y Helical Rack & Pinion, Z Precision Ball Screw
Travel Drive Method X-Y-Z Simultaneous 3-axes (Z-axis height control is also possible)
Table Pass Height: in (mm) 34.6 (880)
Processing Access Manual Door
Pallet Changer Provided
Rapid travel speed [X,Y]: in/min. (m/min.) 3940 (100) single axis, 5550 (141) simultaneous
Max. processing feedrate: in/min. (m/min.) 1970 (50)
Positioning Precision: in (mm) 0.0019/20 (0.05/500) X, Y axis, 0.0039/4 (0.1/100) Z-axis
Repeatable accuracy [X,Y]: in (mm) +/-0.00039 (+/-0.01)
Drive Motor Type Intelligent AC Servo
Max. workpiece weight: lb (kg) 3660 (1660)
Installation Dimensions (W x D): in (mm) 573.1 x 367.4 (14,560 x 9,330)
Machine Unit Dimensions (W x D x H): in (mm) 530.3 x 96.8 x 217.4 (12,575 x 2,458 x 12,575)
Machine System Weight: lb (kg) 42,330 (19,200)
Floor Space Req. sq. ft. (m2) 1,462 (136)
Type Self contained PC NC
Display screen 15" TFT color LCD touch screen
Hard disk 20.0 GB
Generator output control Output Power, Frequency, Duty
Generator operation control Beam ON/OFF, laser gas change, etc.
Drive system X,Y,Z simultaneous control
Position detection system Encoder
Min. command unit: in (mm) 0.0001 (0.001)
Program input system USB, Computer Link, Eternet LAN


  • High speed, heavy-duty motion system
  • Superior edge quality and processing consistency over entire work area
  • PC-based, 64-bit NC control has touch-screen user interface and full network capability
  • Provides the ultimate stability that ensures high-speed processing accuracy
  • Mitsubishi safety package includes full side covers
  • Heavy-duty, high-speed pallet changer maximizes throughput
  • Gas change time is improved by 60% over previous model,  approximately 10 minutes from start up time
  • Helical Rack and Pinion reduces noise, and allows for an increase in acceleration in X and Y axes and provides increased accuracy and longer life time
  • Magnetic Head is standard, allowing for quicker recovery after collision
  • Built in Jet Pierce provides the ability to aggressively pierce mild steel
  • New Mitsubishi Control with Faster graphical interface, USB compatibility and expanded programming options
  • ECO MODE available for increased energy savings
  • New PHXS Head has new lens cartridge design which allows for more constant centering and the focus lens will achieve better performance due to this design change.  The PHXS Head allows for a 10" focal length option
  • Improved Diamond Path Technology for constant beam control and exceptional cutting performance
  • Nozzle Changer Option is available


(440) 424-2201
(800) 234-5277